Register forum user name Search FAQ

Gammon Forum

Notice: Any messages purporting to come from this site telling you that your password has expired, or that you need to verify your details, confirm your email, resolve issues, making threats, or asking for money, are spam. We do not email users with any such messages. If you have lost your password you can obtain a new one by using the password reset link.
 Entire forum ➜ MUSHclient ➜ Announcements ➜ Version 5.04 released

Version 5.04 released

Postings by administrators only.

Refresh page


Posted by Nick Gammon   Australia  (23,120 posts)  Bio   Forum Administrator
Date Wed 14 Dec 2016 01:13 AM (UTC)
Message

I am pleased to release version 5.04 of MUSHclient. See the release notes for more details.

Improvements

  • Fixed bug in AnsiNote where if you used 256-colour ANSI, followed by normal ANSI, the normal ANSI sequence would be incorrectly interpreted as 256-colour ANSI.
  • Fixed bug where when doing a Note (or similar) it would be deferred when done from inside a plugin callback, even if the current output line only consisted of other notes.
  • Fixed bug where setting the seconds for a timer (which fires "at" a time) using SetTimerOption would fail to change the seconds.
  • Fixed bug where after doing a Note, ColourNote, or AnsiNote the note colour might bleed through to the next line of MUD output.

Download

You can view the release notes for version 5.04

You can download MUSHclient 5.04 now from ...

You are strongly advised to backup (make a copy of) your existing MUSHclient world files before upgrading. Just in case.

If there are any problems, please post messages to the Bug Reports, Suggestions, or General parts of this forum.


MD5 sum for the installer

If you do an md5sum on mushclient504.exe you should get this result:

49c52aa3a4f5b6d58d8257420a7884fa

The forum post a small script to sumcheck the MUSHclient download shows how you can write a small script in MUSHclient to do the sumcheck. It also lists some places you can download md5sum.exe to do the sumcheck (if this is the first time you have downloaded MUSHclient).

One way of doing an md5sum is to download the Installer_sumcheck plugin from the Plugins page (RH click that link and "save link as" to get the plugin). Then install the plugin (see the File menu -> Plugins) and type "md5sum" which lets you browse to the installer file, load it, and display the sumcheck.


Message about "Failed to load resources file"

Some users are reporting getting a message like "Failed to load resources file: C:\Programme\MUSHclient\locale\DE.dll - trying English file" when starting MUSHclient (the DE.dll part might be another language like FR.dll).

This will be because you have customized the "locale" of MUSHclient to other than EN (English). See the How to localize MUSHclient messages into other languages forum posting for more details about localization.

To fix this, find the directory you installed MUSHclient into (eg. "C:\Program Files\MUSHclient\") and then locate the subdirectory "locale". In that you will find a file en.dll. Copy or rename that file to match the missing file in the message (eg. copy en.dll to de.dll).

Alternative suggestion: Go into the File menu -> Global Preferences -> General, and change the field "Locale code" back to "EN" (English) and then it should look for EN.DLL next time.


Warning about Lua 5.1 upgrade (September 2006)

MUSHclient version 3.80 upgraded the Lua script engine from Lua 5.0.2 to 5.1.1. If you are upgrading to this version from an earlier version than 3.80, you should read Version 3.80 released - with Lua 5.1 script engine - this post has recommendations about what is required if you use Lua scripting or Lua plugins. Note: Since version 3.80 was released, the version of Lua has been upgraded. It is currently 5.1.4. Some versions (versions 4.49 to 4.52 of MUSHclient) may incorrectly report they are using Lua 5.1.1 when you open a world.


Warning about upgrading from versions prior to 3.21 (May 2002)

MUSHclient version 3.85 (onwards) no longer reads the old "binary" world files produced by versions prior to 3.21. For more information about this please read the forum post Versions 3.85 onwards no longer support world files created prior to version 3.21 - this post has recommendations about how to upgrade your world files if you are upgrading from a version earlier than 3.21.

Note that version 3.21 was released quite a few years ago (May 2002), so people who have recently installed MUSHclient should not have any problems.


Source code

The source code for this version is available from GitHub:

http://github.com/nickgammon/mushclient/tree/v5.04

You can directly download the source from the Downloads page (https://github.com/nickgammon/mushclient/archive/master.zip), or preferably install Git and use the appropriate commands to clone or pull the source. For some suggestions about getting the source from Git see MUSHclient source being made available on GitHub forum posting.

If you install Git, subsequent downloads (of new versions) will be much faster as it only needs to download the changes, not the whole source. Also by using Git you can find out exactly what has changed from version to the next.

Summary of changes in this version


$ git --no-pager diff v5.03..v5.04 --stat

 MUSHclient.rc                        |   8 +-
 doc.cpp                              |   4 +
 doc.h                                |   4 +-
 install/readme.txt                   |   4 +-
 scripting/methods/methods_noting.cpp | 504 ++++++++++++++++++-----------------
 scripting/methods/methods_timers.cpp |  18 ++
 6 files changed, 288 insertions(+), 254 deletions(-)

   

Commit log (date order)


$ git --no-pager log --pretty=oneline --reverse --abbrev-commit v5.03..v5.04

462bc81 Updated version number to 5.04
3355d1e Fixed bug in AnsiNote
7290cfe Fixed problems with AnsiNote and note-deferring
5d70148 stop style bleed after notes since 5.04
b51d331 Fixed bug in setting 'seconds' for 'at' timer in script
1788a12 Merge branch 'patch-1' of https://github.com/fiendish/mushclient into fiendish-patch-1
1b4b05d Merge branch 'fiendish-patch-1'
e7b539f Bug fix re not having an output window
da3f322 Final changes before release


- Nick Gammon

www.gammon.com.au, www.mushclient.com
Top

The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).

To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.


9,195 views.

Postings by administrators only.

Refresh page

Go to topic:           Search the forum


[Go to top] top

Information and images on this site are licensed under the Creative Commons Attribution 3.0 Australia License unless stated otherwise.