Notice: Any messages purporting to come from this site telling you that your password has expired, or that you need to verify your details, confirm your email, resolve issues, making threats, or asking for money, are
spam. We do not email users with any such messages. If you have lost your password you can obtain a new one by using the
password reset link.
Due to spam on this forum, all posts now need moderator approval.
Entire forum
➜ MUSHclient
➜ General
➜ Setting a consistent speedwalk delay time on trigger
|
Setting a consistent speedwalk delay time on trigger
|
It is now over 60 days since the last post. This thread is closed.
Refresh page
| Posted by
| Vingthor
(1 post) Bio
|
| Date
| Fri 27 Mar 2020 08:04 PM (UTC) |
| Message
| Hello,
I have read and searched the forum on numerous speedwalk delay topics to try and implement this correctly.
I am using speedwalk delay to send to the world a delayed command at an 11000ms interval every time the trigger I have set goes off.
My problem is that the 11 second delay doesn't seem to actually send the command after 11 seconds, it might be immediately after the trigger, a few seconds after, or like 6 or 7 seconds later.
Here's what it looks like-
Trigger: Your aura appears to be indigo.
Send: channel 25 earring
Send to: World (speedwalk delay)
Everything else is default, it's enabled, and under Configuration --> Input ---> Commands, speed walking is enabled and set to an 11000ms delay, but it is not consistent when the MUD I'm playing sends to the output: Your aura appears to be indigo. I see the command queue up, but the timing is off each time.
Thank you. | | Top |
|
| Posted by
| Fiendish
USA (2,555 posts) Bio
Global Moderator |
| Date
| Reply #1 on Fri 27 Mar 2020 09:07 PM (UTC) Amended on Fri 27 Mar 2020 09:08 PM (UTC) by Fiendish
|
| Message
| The speedwalk delay only delays between commands in the speedwalk queue, not before them.
Quote:
I am using speedwalk delay to send to the world a delayed command at an 11000ms interval every time the trigger I have set goes off.
This is not the correct use of speedwalk delay.
Use DoAfter instead. |
https://github.com/fiendish/aardwolfclientpackage | | Top |
|
The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).
To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.
10,526 views.
It is now over 60 days since the last post. This thread is closed.
Refresh page
![[Go to top]](/images/gototop.gif)
top