Notice: Any messages purporting to come from this site telling you that your password has expired, or that you need to verify your details, confirm your email, resolve issues, making threats, or asking for money, are
spam. We do not email users with any such messages. If you have lost your password you can obtain a new one by using the
password reset link.
Due to spam on this forum, all posts now need moderator approval.
Entire forum
➜ MUSHclient
➜ General
➜ MCCP doesn't seem to be working..
|
MCCP doesn't seem to be working..
|
It is now over 60 days since the last post. This thread is closed.
Refresh page
| Posted by
| Shawn
(3 posts) Bio
|
| Date
| Tue 15 May 2001 06:43 PM (UTC) |
| Message
| The mud I usually play on has recently asked the players to help reduce bandwidth through the use of MCCP. When I went to the page (http://www.randomly.org/projects/MCCP/clients.html) I noticed that MUSHclient was listed as a client that supported the MCCP protocol. I double checked the MUSHclient compression helpfile and checked that disable compression was not checked. However, the mud implements code that checks to see who is using compression and I was not listed. I have since set up and am using a proxy mcclient program (and with the proxy the mud recognizes the compression).
I would like to know if there is some other step within MUSHclient that I need to take to have a fully functional compression without the use of mcclient. Or if there is some way for me to indicate to the implementor of the game that MUSHclient is actually compressing information although the mud does not indicate that it is.
Thank you,
Shawn | | Top |
|
| Posted by
| Nick Gammon
Australia (23,173 posts) Bio
Forum Administrator |
| Date
| Reply #1 on Wed 16 May 2001 11:37 AM (UTC) |
| Message
| I am this very day adding MCCP version 2 support to MUSHclient. Also, there was a bug in MUSHclient (3.04) where it didn't properly negotiate MCCP version 1 under some circumstances.
This new version (3.05) should be released in the next couple of days, and your problem should then go away.
So I can test in advance of releasing it, can you please post the address of the MUD you are trying to use it with?
Thanks. |
- Nick Gammon
www.gammon.com.au, www.mushclient.com | | Top |
|
| Posted by
| Nick Gammon
Australia (23,173 posts) Bio
Forum Administrator |
| Date
| Reply #2 on Thu 17 May 2001 02:03 AM (UTC) |
| Message
| | MUSHclient 3.05 has now been released. This supports MCCP version 2. Please click on the "Downloads" button at the top of this page to download it. |
- Nick Gammon
www.gammon.com.au, www.mushclient.com | | Top |
|
| Posted by
| Shawn
(3 posts) Bio
|
| Date
| Reply #3 on Fri 18 May 2001 04:35 AM (UTC) |
| Message
| | Thank you. The mud I usually play on is called Aardwolf. It's address is wolf.mudservices.com port 4000 or port 4010. | | Top |
|
| Posted by
| Nick Gammon
Australia (23,173 posts) Bio
Forum Administrator |
| Date
| Reply #4 on Fri 18 May 2001 05:49 AM (UTC) |
| Message
| Version 3.05 seems to work there fine. Look at the "Info" tab on the world configuration screen, and you can see, once you have supplied your name, that it shows "MCCP v 2" on the line where it says "Compression Ratio".
|
- Nick Gammon
www.gammon.com.au, www.mushclient.com | | Top |
|
The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).
To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.
18,489 views.
It is now over 60 days since the last post. This thread is closed.
Refresh page
![[Go to top]](/images/gototop.gif)
top